Monday 29 September 2014

Flash A Bios To Upgrade

Pre-XP systems often require a floppy disk to upgrade the BIOS.


Solve hard drive, memory and other hardware issues after a system upgrade by flashing the Basic Input Output System (BIOS). Flashing is the process by which the BIOS is upgraded. When the upgrade is installed, the BIOS is flashed or replaced by a new version of the software. Flash the BIOS to upgrade only when necessary, as BIOS upgrades are only recommended after major hardware changes or operating system upgrades. Computer and motherboard makers release BIOS upgrades on an as-needed basis.


Instructions


1. Open an Internet browser window and navigate to your computer or motherboard maker's website.


2. View the Support, Help or Downloads section of the website. Each site is different. If you have problems locating these sections, type "BIOS" into the search bar of the maker's website.


3. Enter any required information to view the correct BIOS upgrades for your specific system. Some sites have drop-down menus, while others require you to choose from a list of links.


4. Press the download link to download the latest version of the BIOS.


5. Read all flashing instructions listed on the maker's website. If the instructions are not on the website, look for a "Readme.txt" file with your BIOS file.


6. Double-click the BIOS upgrade file to run the BIOS flash program. Follow any prompts to upgrade your BIOS. This applies mainly to Windows XP and later systems.


7. Place the BIOS file on a formatted floppy disk or CD. Boot your system with the disk inserted to flash the BIOS. This applies mainly to pre-Windows XP systems.

Tags: BIOS upgrades, maker website, applies mainly, BIOS file, BIOS This, BIOS This applies, BIOS upgrade